Compact underground hydraulic operators for swing gates. Residential and condominium use. The automation is located underground and therefore does not affect the look of the gate. Very low noise levels thanks to the hydraulic brake to slow down the gate during opening and closing thus preventing rebound and noisy impact. Anti-crush system with very sensitive bypass valves calibrated during installation. This immediately cuts the hydraulic pressure in the event of obstacles to ensure maximum system safety.
TECHNICAL DETAILS
The system consists of underground self-supporting boxes aligned with the hinges. The boxes contain the hydraulic jacks which are connected to the hydraulic control panels using copper couplings. The system envisages an easy-maintenance selfsupporting box. The jack is accessed by removing the stainless steel cover without having to remove the wing. A twin hydraulic lock prevents lock use with wings less than 2 metres and enables the gate to be stopped in any position. An easy-to-use manual release device ensures gate functioning in the event of a mains power supply.
| Τechnical Data | ||||
| B4 | B5 | SF4 | SF5 | |
| Max leaf width: | 2,0 m | 2,0 m | 4,0 m | 4,0 m |
| Single-phase power supply: | 230V - 50Hz | |||
| Power absorbed: | 250 W | |||
| Pump capacity (l/min): | 0,6 | 0,75 | 0,6 | 0,75 |
| Operating temperature: | -20°/+70° C | |||
| Protection rating: | IP 54 | |||
